Summary
The service manual for the Whirlpool dryer model WED8620HW2 focuses on essential diagnostic guides and troubleshooting procedures for service technicians. Key diagnostic steps include activating the service diagnostic mode, which is done by selecting three buttons on the control panel (excluding the POWER and START buttons) and pressing them in a specific sequence three times within 8 seconds. When successfully activated, all indicators on the console will light up for 5 seconds, and the display will show “888.” If there are no fault codes, the indicators turn off, and the “888” message remains. To exit the diagnostic mode, technicians can either hold the first button to activate the mode for 5 seconds or press the POWER button once.
Common error codes for the WED8620HW2 dryer are critical for effective troubleshooting. Codes like F1E1 indicate motor or heater failure or a connector problem, while F3E1, F3E2, and F3E3 relate to thermistor and moisture sensor issues, such as open or shorted circuits. FCE1 signifies lost communication with the Wi-Fi module, and F6E1 and F6E2 point to HMI/ACU communication errors. Proper interpretation of these codes is crucial for diagnosing and resolving issues with dryer components like the exhaust thermistor, moisture sensor, and heater elements.
Essential maintenance procedures outlined in the tech sheet emphasize safety during voltage measurements and part replacements. Technicians are reminded to always disconnect power before servicing and to use appropriate testing equipment to prevent electrical hazards. The document also provides a detailed temperature-resistance chart for both inlet and outlet thermistors, which is invaluable for assessing sensor functionality and ensuring accurate repairs.
EN 
ES